8-123
AP7131>admin(network.wireless.qos)> show
Description:
Displays the access point’s current QoS policy by summary or individual policy.
Syntax:
Example:
admin(network.wireless.qos)>show summary
----------------------------------------------------------------------
QOS Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default WLAN1, mudskipper
2 IP Phones Audio Dept
3 Video Vidio Dept
admin(network.wireless.qos)>show policy 1
Policy Name Default
Support Legacy Voice Mode disable
Multicast (Mask) Address 1 01005E000000
Multicast (Mask) Address 2 09000E000000
WMM QOS Mode disable
WMM QOS Parameter Set 11ag-default
For information on configuring the WLAN QoS options available to the access point using the applet (GUI), see Setting the WLAN
Quality of Service (QoS) Policy on page 5-39.
show summary Displays all exisiting QoS policies that have been defined.
policy <index> Displays the configuration for the requested QoS policy.
To Next Page
Loading...
