AP-7131 Access Point Product Reference Guide8-142
AP7131>admin(network.wireless.mu-locationing> set
Description:
Defines the MU probe table configuration used for locating MUs.
Syntax:
Example:
admin(network.wireless.mu-locationing)>set
admin(network.wireless.mu-locationing)>set mode enable
admin(network.wireless.mu-locationing)>set size 200
admin(network.wireless.mu-locationing)>
set Defines the MU probe table configuration.
mode Enables/disables a mu probe scan.
size Defines the number of MUs in the table (the maximum allowed is 200).
To Next Page
Loading...
