AP-7131 Access Point Product Reference Guide8-144
AP7131>admin(network.firewall)> show
Description:
Displays the access point firewall parameters.
Syntax:
Example:
admin(network.firewall)>show
Firewall Status : disable
NAT Timeout : 10 minutes
Configurable Firewall Filters:
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192 bytes
max mime headers : 16 headers
For information on configuring the Firewall options available to the access point using the applet (GUI), see Configuring Firewall
Settings on page 6-27.
show Shows all access point firewall settings.
To Next Page
Loading...
