8-223
AP7131>admin(system.radius.proxy)> set
Description:
Sets Radius proxy server parameters.
Syntax:
Example:
admin(system.radius.proxy)>set delay 10
admin(system.radius.proxy)>set count 5
admin(system.radius.proxy)>
For information on configuring Radius proxy server values using the applet (GUI), see Configuring a Proxy Radius Server on page 6-70.
set Sets Radius proxy server parameters.
delay Defines retry delay time (in seconds) for the proxy server.
count Defines retry count value for the proxy server.
To Next Page
Loading...
