8-253
AP7131>admin(stats)> send-cfg-all
Description:
Copies the access point’s configuration to all of the access points within the known AP table.
Syntax:
Example:
admin(stats)>send-cfg-all
admin(stats)>
For information on copying the access point config to another access point using the applet (GUI), see Viewing Known Access Point
Statistics on page 7-33.
send-cfg-all Copies the access point’s configuration to all of the access points within the known AP table.
NOTE The send-cfg-all command copies all existing configuration parameters except Mesh settings, LAN IP
data, WAN IP data and DHCP Server parameter information.
To Next Page
Loading...
