8-255
AP7131>admin(stats)> flash-all-leds
Description:
Starts and stops the illumination of a specified access point’s LEDs.
Syntax:
Example:
admin(stats)>
admin(stats)>flash-all-leds 1 start
Password ********
admin(stats)>flash-all-leds 1 stop
admin(stats)>
For information on flashing access point LEDs using the applet (GUI), see Viewing Known Access Point Statistics on page 7-33.
flash-all-leds <index> Defines the Known AP index number of the target AP to flash.
<stop/start> Begins or terminates the flash activity.
To Next Page
Loading...
