Advanced Features
English
49
Turning the Bluetooth Off
Procedure:
1 Press the preprogrammed button to turn the Bluetooth off.
2 The Blue LED blinks three times, a short, medium-pitched
tone sounds. The display shows momentary BT OFF, and
b
disappears.
Re-Pair Timer
There are two options for configuring your radio’s Bluetooth
pairing type. The type defines the duration your radio and the
accessory retain the pairing information.
• Immediate – (For headset and PTT only.) When your radio
and/or device is turned off after pairing, the keys are lost. Due
to this, when your radio and your device are turned back on,
they are unable to re-connect. You must re-pair the devices to
re-establish a new set of pairing keys. See Pairing the
Bluetooth Device with Your Radio on page 50.
• Infinite – (For headset, PTT and data devices.) When your
radio and/or device are turned off after pairing, keys are NOT
lost. When your radio and the device are turned back on, they
can resume the Bluetooth connection without your
intervention.
Re-Pair Timer
Options
Re-Pair Timer Scenarios
Immediate
(for headset
and PTT only)
• When your radio is powered OFF, pairing
key is lost immediately, and accessory
attempts to pair again. If pairing is
unsuccessful within the Drop Timer value,
the accessory automatically powers OFF.
• When the accessory is powered OFF, all
keys are lost immediately, and you must
re-pair the devices.
• When the devices lose Bluetooth
connection, the devices will attempt to re-
establish Bluetooth Connection within the
Drop Timer value.
Infinite
(for headset,
PTT and data
devices)
• When your radio is powered OFF, the
accessory attempts to re-establish the
Bluetooth Connection for a period of time
depending upon the Drop Timer value. If
the devices fails to reconnect within the
period, the accessory then powers OFF.
APX_3000_M1.book Page 49 Wednesday, October 17, 2012 12:56 PM
To Next Page
Loading...
Need help?
General
