Motorola APX 3000

Advanced Features
English
52
2 If the Bluetooth device successfully re-connects before the
Bluetooth Drop Timer expires, Blue LED light solid blue for
two seconds. Your radio display shows momentary <Device
Type> CONNCTED, and
a shows persistently.
OR
If the Bluetooth device fails to re-connect within 10 seconds,
blue LED blinks rapidly for two second and the blinking
a is
replaced by a persistent b.
Turning the Bluetooth Audio On (Routing the
Audio from Your Radio to the Headset)
Procedure:
With the external device Bluetooth turned ON.
1 Press the preprogrammed button to route the audio from
your radio to the headset.
2 The blue LED blinks momentarily short blinking blue. Your
radio sounds a short, medium-pitched tone. The display
shows HDSET ON.
Turning the Bluetooth Audio Off (Routing the
Audio from the Headset to Your Radio)
Procedure:
With the external device Bluetooth turned ON.
1 Press the preprogrammed button to route the audio from the
headset to your radio.
2 The blue LED blinks momentarily short blinking blue. Your
radio sounds a short, medium-pitched tone. The display
shows SPKR ON.
Adjusting the Volume of Your Radio from
Bluetooth Audio Device
Procedure:
With the Bluetooth audio device connected to your radio:
1 Adjust volume up/down on the bluetooth audio device.
2 Your radio display shows VOL XX and sounds a short,
medium-pitched tone.



APX_3000_M1.book Page 52 Wednesday, October 17, 2012 12:56 PM