Advanced Features
English
94
Logging out of Two-Factor Authentication
Procedure:
1 Press the Menu Select button directly below Logt.
2 The display shows Clear private data?.
OR
If the Delete Messages On Session End feature is enabled,
the display shows momentary Private data cleared.
3 Select Yes to clear all your private data. The display shows
momentary Private data cleared.
OR
Select No to keep your private data.
Note: Private data refers to all messages in the text
messaging Inbox, Draft, and Sent folder. The next user
is able to access the Inbox, Draft and Sent messages if
private data is not deleted.
Note: Radio which is successfully logged in to the secured
system receives advertisement from the server that the
access to the data for query is enabled.
Sending a Query
This feature is available for radio users who have successfully
logged in with the Two-Factor Authentication. Query is a special
form of Quick Text marked with a flag that is replied or
dispatched in normal TMS message. The query template needs
to be configured in the quick test list of the CPS. You can
choose from the quick text list, including queries if present.
You shall receive a service advertisement message to indicate
the Query is available after you have successfully logged in the
radio with a Two-Factor Authentication.
Note: The query server must be selected as the destination
so that it can receive the query message and respond
the query with text message. The query server must be
an entry in the data user list in the CPS.
Procedure:
Press the preprogrammed TMS Query button and proceed to
Step 5.
OR
Follow the procedure below.
1 < or > to TMS.
2 Press the Menu Select button directly below TMS to access
the TMS feature screen.
3 U or D to Compose and press the Menu Select button
directly below Sel.
OR
To Next Page
Loading...
