Motorola ASTRO APX 6000XE Series - Stopping SSA Notification of a Single Site Via Manual Entry

Advanced Features
English
136
5 If the request is successful, the display shows Req
successful.
OR
If the site is not available, the display shows <Site Alias>
not available.
OR
If the site does not exist, the display shows <Site Alias>
does not exist.
6 Press the Menu Select button directly below Exit to return
to the Home screen.
7 The SSA Alert for the designated site stops.
Stopping SSA Notification of a Single Site Via
Manual Entry
Procedure:
1 > or < to SSA.
2 Press the Menu Select button directly below SSA. The
display shows the Site Alert screen.
3 D or U to Stop Alert and press the Menu Select button
directly below Sel. The display shows the Select Site
screen.
4 D or U to {SiteID Entry} and press the Menu Select
button directly below Edit.
5 The display shows the Enter SiteID screen. Key in the
required Site ID and press the Menu Select button directly
below Send.
6 If a wrong Site ID is entered, the display shows Invalid ID
and prompts to enter the Site ID again.
OR
If a correct Site ID is entered, the display shows Sending
req.
7 If the request is successful, the display shows Req
successful.
OR
If the single site is not available, the display shows <Site
ID> not available.
OR
If the single site does not exist, the display shows <Site ID>
does not exist.
8 Press the Menu Select button directly below Exit to return
to the Home screen.
9 The SSA Alert for the designated site stops.
