Advanced Features
English
72
Tactical Public Safety (TPS) (Conventional
Only)
Using TPS Normal Transmission
TPS enabled the users of a group to identify a transmission
starts and ends clearly by displaying the caller’s name or ID on
the radio display.
Procedure:
1 At TPS Zone Channel
Press PTT button to transmit.Talk clearly into the
microphone. Release PTT button to listen.
OR
Receive and listen to call, the radio displays the caller’s
name or ID.
Using TPS Emergency Transmission
Emergency Beacon – During Emergency if the TPS radio user
pushes the Emergency button, the radio sounds a Beacon at
the maximum volume of the radio at radio’s internal speaker
and it is not adjustable. This beacon goes to silent when user
presses the PTT button for voice transmission.
Emergency Call De-Key Sidetone – The radio sounds an alert
tone to remind radio user that the Emergency Mode is still
active after user releases the PTT button for an Emergency call
transmission. The volume of loudness depends on the
maximum tone at your radio profile.
Procedure:
1 Press the Emergency button to enter Emergency Mode.
You hear Emergency Beacon.
2 Press PTT button to make Emergency Call.
3 Release to listen. You hear Emergency Call De-Key
Sidetone. After a short pause, you hear Emergency Beacon.
4 Long press Emergency button to exit Emergency mode and
cancel Emergency Beacon.
To Next Page
Loading...
