Advanced Features
English
132
Procedure:
You hear a voice announcement when the features below are
preprogrammed in the radio.
• The radio powers up. The radio announces the current zone
and channel it is transmitting.
• Press the preprogrammed voice announcement button
(which specifically programmed to playback the current zone
and channel). The radio announces the current zone and
channel it is transmitting.
Note: Pressing this preprogrammed playback button will
always enable the voice feature to announce in High
priority.
All the three programmable buttons at the side of the
radio support this feature.
• Change to a new zone. The radio announces the current
zone and channel it is transmitting.
• Change to a new channel remaining within the current zone.
The radio announces the current channel.
• Press either the Menu Select button or preprogrammed
button or switch of the radio to launch or terminate Scan, PL
Disabled, Talkaround/Direct or Transmit Inhibit. The radio
announces the corresponding feature activation or
deactivation.
Using Site Selectable Alerts (ASTRO 25)
A Site Selectable Alert (SSA) is an Intelligent Lighting indicator
together with audio alert sent to radios at a site or a few sites to
notify the users when there is a special situation that they need
to be aware of. Only authorized radios are enabled to send
SSA.
Upon the activation of a SSA, the receiving radios display the
alert alias and generate the periodic alert tone.
Note: Alert alias, alert tone, and alert period can be
preprogrammed. Alert period is the duration for the
radio to repeat the alert tone. An interval of 5 seconds
might impact the battery life of the radio. Check with
your dealer or system administrator for more details.
When mixing SSA with received voice audio, the SSA
alert is reduced in volume to ensure that the voice
message is still heard clearly. Therefore, it is important
that the SSA audio files are created with clear loud
audio to ensure they can still be heard clearly when
played at reduced levels.
Sending SSA Notification to Single Site
Procedure:
1 > or < to SSA.
To Next Page
Loading...
