Advanced Features
English
149
IMPRES™ Battery Annunciator
This feature displays the current capacity and charges cycles of
your battery when an IMPRES Battery is powering your radio.
This feature must be enabled in your radio to see the
information.
The information shown are:
• Rated Capacity – Percentage of current battery capacity.
• Remaining Capacity – Remaining power of the battery in
mAh.
• Estimated Charges – Number of charges cycles the battery
has gone through.
Accessing the Battery Info screen
Procedure:
Use the Options Menu.
1 < or > to Batt.
2 Press the Menu Select button directly below Batt. The
display shows the details of the battery.
3 Press the Menu Select button directly below Exit to return to
the Home screen.
Accessing the General Radio Information
Your radio contains information on the following:
• Radio Information
• IP Display
• Control Assignments
• Soft ID (If Enabled)
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
To Next Page
Loading...
Need help?
General
