Motorola ASTRO APX 6000XE Series User Manual

General Radio Operation
English
41
During the call, the display shows the caller ID (number), if
the caller’s name is not in the call list.
4 Press and hold the PTT button to talk. Release the PTT
button to listen.
5 Press H or the Call Response button to hang up and
return to the Home screen.
See Making a Private Call (Trunking Only) on page 42 for
details on making a Private Call.
Receiving and Responding to a Telephone Call
(Trunking Only)
This feature allows you to receive calls similar to standard
phone calls from a landline phone.
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Procedure:
Use the preprogrammed Call Response button to answer a
Telephone Call:
1 You hear a telephone-type ringing and the LED blinks green.
The backlight of the screen and the bar turns green. The
display shows Phone Call and the call received icon blinks.
2 Press the Call Response button within 20 seconds after the
call indicators begin.
3 Press and hold the PTT button to talk. Release the PTT
button to listen.
4 Press H or the Call Response button to hang up and
return to the Home screen.
See Making a Telephone Call (Trunking Only) on page 44 for
details on making a Telephone Call.


Motorola ASTRO APX 6000XE Series Specifications

General

Frequency Range	700/800 MHz, VHF, UHF Range 1, UHF Range 2
Operating Temperature	-30°C to +60°C
P25 Phase 1 & 2	Yes
Bluetooth	Yes
GPS	Yes
Weight	381 g (with standard battery)
Encryption	AES, DES-OFB
Intrinsically Safe	Yes