Motorola ASTRO APX 6000XE Series User Manual

Advanced Features
English
152
Editing the Soft ID
This feature allows you to change your username.
Note: Your radio must be preprogrammed to allow you to use
this feature.
Procedure:
Press the preprogrammed Info button and proceed to Step 3.
OR
Follow the procedure below.
1 < or > to Info.
2 Press the Menu Select button directly below Info.
3 U or D to Soft ID and press the Menu Select button directly
below Sel.
4 The display shows the current Soft ID.
5 Press the Menu Select button directly below Edit to edit the
current Soft ID.
OR
Press the Menu Select button directly below Back to return
to the previous screen.
6 A blinking cursor appears in the Edit Soft ID screen.
Use the keypad to edit the text.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
Press
* to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
7 Press the Menu Select button directly below Ok to save the
new Soft ID and return to the previous screen.
OR
Press the Menu Select button directly below Cncl to return
to the previous screen.


Motorola ASTRO APX 6000XE Series Specifications

General

Frequency Range	700/800 MHz, VHF, UHF Range 1, UHF Range 2
Operating Temperature	-30°C to +60°C
P25 Phase 1 & 2	Yes
Bluetooth	Yes
GPS	Yes
Weight	381 g (with standard battery)
Encryption	AES, DES-OFB
Intrinsically Safe	Yes