Advanced Features
English
85
Saving a Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to SAVE AS WAYPT and press the Menu Select
button directly below SEL.
OR
> or < to SAVE AS HOME and press the Menu Select
button directly below SEL and proceed to Step 5.
OR
> or < to SAVE AS DEST. and press the Menu Select
button directly below SEL and proceed to Step 5.
3 A blinking cursor appears in the screen. Use the keypad to
type the alias via multi-tap.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
4 Press the Menu Select button directly below OK once you
are done.
5 The display shows SAVED AS <WAYPOINT NAME>.
OR
The display shows SAVED AS HOME.
OR
The display shows SAVED AS DEST..
6 Press H or the PTT button (if preprogrammed) to exit this
menu.
Viewing a Saved Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below OPTN.
2 > or < to WAYPOINTS.
O5Head_6875947m01.book Page 85 Tuesday, November 1, 2011 12:06 PM
To Next Page
Loading...
