Advanced Features
English
54
Scan
This feature allows you to monitor traffic on different channels
by scanning a preprogrammed list of channels.
Turning Scan On or Off
Procedure:
Press the preprogrammed Scan button.
OR
Follow the procedure below.
1 > or < to SCAN.
2 Press the Menu Select button directly below SCAN.
3 The display shows SCAN OFF if scan is disabled. Press the
Menu Select button directly below SCAN to enable scan.
OR
The display shows SCAN ON and the scan status icon if
scan is enabled. Press the Menu Select button directly
below SCAN to disable scan.
4 The radio returns to the Home screen.
Turning Scan On While Disregarding the Squelch
Code (Conventional Channels Only)
Procedure:
1 > or < to MON.
2 Press the Menu Select button directly below MON.
3 The brief MONITOR ON display indicates that the radio is
disregarding the squelch code.
While scanning for activity, you can still receive fleetwide,
system-wide, dynamic regrouping, incoming telephone
interconnect and Private Conversation/Call Alert calls.
Respond to these types of calls as you would normally on the
selected channel. However, when scanning different channels
while in talkgroup scan, incoming Private Conversation/Call
Alert calls may be missed.
Transmitting While the Scan is On
Radio Programmed for Talkback Scan
Procedure:
1 Press the PTT button to transmit on the channel indicated
by the display.
O5Head_6875947m01.book Page 54 Tuesday, November 1, 2011 12:06 PM
To Next Page
Loading...
Need help?
General