General Radio Operation
English
31
Receiving and Responding to a Private Call
(Trunking Only)
A Private Call is a call from an individual radio to another
individual radio.
These one-to-one calls between two radios are not heard by
others in the current talkgroup. The calling radio automatically
verifies that the receiving radio is active on the system and can
display the caller ID.
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Procedure:
When you receive a Private Call:
1 You hear two alert tones and the LED blinks green. The
display shows CALL RECEIVED and the caller alias or ID.
2 Press the Menu Select button directly below RESP within 20
seconds after the call indicators begin.
3 During the call, the display shows the caller alias (name), if it
is in the call list.
OR
During the call, the display shows the caller ID (number), if
the caller’s name is not in the call list.
4 Press and hold the PTT button to talk. Release the PTT
button to listen.
5 Press H to hang up and return to the Home screen.
Note: If you press PTT button before pressing the Menu
Select button directly below RESP, your conversation
will be heard by all members of the talk group.
If 20 seconds pass before you press the Menu Select
button directly below the RESP, you will not respond
privately to the call just received. Instead, you initiate a
Private Call.
See Making a Private Call (Trunking Only) on page 33 for
details on making a Private Call.
O5Head_6875947m01.book Page 31 Tuesday, November 1, 2011 12:06 PM
To Next Page
Loading...
Need help?
General