Advanced Features
English
73
Replying to a Received Text Message
Note: The original date and time stamp, address and
message content is automatically appended to the
reply message.
Procedure:
1 > or < to the required aliases or ID and press the Menu
Select button below SEL to view the message.
2 Press the Menu Select button directly below RPLY to reply
to a message.
3 > or < to NEW and press the Menu Select button directly
below NEW.
OR
> or < to LIST and press the Menu Select button directly
below LIST for a predefined message.
OR
> or < to scroll through the list of messages and press the
Menu Select button directly below SEL to select the required
message.
4 A blinking cursor appears on the screen.
OR
The predefined message appears on the Compose screen,
with a blinking cursor at the end of it.
5 Use the keypad to type or edit your message.
Press
< to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
6 Press the Menu Select button directly below OPTN once
you have finished writing the message.
7 > or < to SEND and press the Menu Select button directly
below SEND to send the message.
8 The display shows the Send Message screen and
SENDING MSG.
Press the Menu Select button directly below
BACK
at any time
to return to the previous screen.
Note: You can append a priority message and/or a request
reply to your message. Using the Priority Status and
Request Reply Features on page 70 for more
information.
O5Head_6875947m01.book Page 73 Tuesday, November 1, 2011 12:06 PM
To Next Page
Loading...
Need help?
General