General Radio Operation
English
32
Receiving and Responding to a Telephone Call
This feature allows you to receive calls similar to standard
phone calls from a landline phone.
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Procedure:
1 You hear a telephone-type ringing and the LED blinks green.
The backlight of the screen turns green. The display shows
PHONE CALL and the call received icon blinks.
2 Press the Menu Select button directly below RESP.
3 Press and hold the PTT button to talk. Release the PTT
button to listen.
4 Press H or the Menu Select button directly below EXIT to
hang up and return to the Home screen.
See Making a Telephone Call on page 34 for details.
Making a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by
using:
• The preprogrammed Zone menu
• The Mode Knob
• A preprogrammed One Touch button
• The Contacts list (see Contacts on page 46).
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Making a Talkgroup Call
To make a call to a group of users, your radio must be
configured as part of that talkgroup.
O5Head_6875947m01.book Page 32 Tuesday, November 1, 2011 12:06 PM
To Next Page
Loading...
Need help?
General