Advanced Features
English
64
Accessing the User Login Feature
This feature allows you as the user to be associated with the
radio. With this association, every data application (Example:
Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user.
The user login feature only enables the recipient of your
message to identify you as the sender by assigning a username
to your message.
Note: Valid characters for a username entry are capital
letters (A – Z), small letters (a – z), numbers (0 – 9),
symbols (*, #, -, /), and the space character.
The maximum length for a username is eight (8)
characters. Usernames are not case sensitive in
server mode but are case sensitive in non-server
mode.
A predefined username may sometimes be invalid
because the programming software that is used to set
predefined usernames allows you to set usernames
comprising of eight (8) characters or more.
Logging In as a User
Procedure:
1 > or < to USER.
2 Press the Menu Select button directly below USER.
3 The display shows the User Login screen.
4 Press the Menu Select button directly below ID.
5 A blinking cursor appears beside ID. Use the keypad to
enter a username using the keypad multi-tap function.
OR
> or < to scroll through the list of predefined usernames.
Press the Menu Select button to select a predefined
username.
OR
Press and hold
> or < to scroll through the list of predefined
usernames at a fast scroll rate.
Press the Menu Select button directly below LOGN to select
a predefined username.
6 If the selected predefined username has more than eight (8)
characters, or an invalid character in it, the display
momentary shows INVALID ID. Repeat Step 5.
OR
Press the Menu Select button directly below PIN.
7 A blinking cursor appears beside PIN.
Enter your Personal Identification Number (PIN) number.
O5Head_6875947m01.book Page 64 Tuesday, November 1, 2011 12:06 PM
To Next Page
Loading...
Need help?
General