To Next Page

To Previous Page

General Radio Operation

4. Press N directly below the list you wish to

view. For example, to view the list of telephone

numbers stored in your radio, press

N directly

below

5. The display will show the ﬁrst member in the list (name on the upper line,

number on the lower line). The I status indicator will appear (on

steady), indicating you are in the view mode.

• Changing (Reprogramming) a List

• Only numbers can be changed (reprogrammed) in a list. To change

the names in a list, a qualiﬁed service center must reprogram your

radio using radio service software. A name can be a maximum of 12

characters.

• If you are using the scan feature, refer to page 48 for scan list

reprogramming.

1. Press

> until the PP

softkey appears on the

display. (The exact location of softkeys will vary

based upon individual radio programming.)

I On Steady = View Mode

(See page 71 for a description

of all status indicators.)

Notes

Motorola ASTRO Digital XTS 3000 User Manual

Questions and Answers: