COMMON and
SPECIAL RADIO FEATURES
Most of your radio features can be accessed by
performing the following steps (for more detail,
refer to the feature description in your manual).
1a. Press
>
until
the desired
softkey appears
(see softkey list
below).
2. Press
M
directly below
the desired
softkey.
3. In most cases, the display will change to show
the current state of the feature and the
available softkey choices.
4a. If you want to change the feature state, press
M
directly below the desired softkey choice.
OR
4b. If you do not want to change the feature state,
press
O
or the
PTT Switch
.
OR
1b. Press (or rotate)
the
Feature
Button/Switch
(if
programmed, see
front of card); this
takes your directly
to step 3.
Softkey Feature List
Softkey Feature
CALL
Individual Private-Conversation
Call or Selection Call
CHAN
Channel Selection
DIR
Bypass Repeater (Talkaround) and
Talk Directly to Another Radio
ERAS
Erasure (Zeroization) of
Encryption Key(s)
LOGF
Radio Lock (Log Off)
INDX
Encyption Key(s) Index Grouping
MSG
Message-List Selection
MUTE
Keypad Tones Muting
PAGE
Call-Alert Page
PHON
Telephone Call
PROG
List Programming of Individual-
Call Numbers and Scan Channels
PSWD
Program New Password
PWR
TX Power-Level Selection
RPGM
New Dynamic-Regrouping Request
SCAN
Scan Operation
SITE
Multiple Site Selection
STS
Status-List Selection
VIEW
List Viewing
ZONE
Zone Selection
Softkey Feature
FOLD
FOLD
To Next Page
Loading...
Need help?
General
