Motorola ASTRO Digital XTS 3000 - PTT-ID Receive; PTT-ID Transmit

56
Special Radio Features
PTT-ID Receive
The PTT-ID receive feature allows you to see the radio ID number of the radio
you are currently receiving. This ID can be a maximum of eight characters and
can be viewed by both the receiving radio and the dispatcher. On trunking
radios, pressing
<
or
>
will replace the displayed ID with the softkey menu
selections; pressing
O
will bring back the ID display.
PTT-ID Transmit
The PTT-ID transmit feature is a per channel feature where your radio’s ID
number is automatically sent every time the PTT Switch is pressed. Depending
upon how your radio was programmed, your radio’s ID can be transmitted at
the beginning of a transmission, at the end of a transmission, or at the
beginning and ending of a transmission. For digital voice transmissions, your
radio’s ID is sent during the voice message.
If your radio has MDC-1200™ signalling and the ID is sent before the voice
transmission, you will hear a tone until the ID transmission is completed; this
helps you avoid talking while the ID code is being transmitted.
To view your radio’s ID number:
1a. Press
>
until the
CC
CC
AA
AA
LL
LL
LL
LL
or
PP
PP
AA
AA
GG
GG
EE
EE
softkey appears on the display.
2. Press
M
directly below
CC
CC
AA
AA
LL
LL
LL
LL
or
PP
PP
AA
AA
GG
GG
EE
EE
.
3. Press
<
.
4. The display changes to show your
radio’s ID.
MM
MM
YY
YY
II
II
DD
DD
::
::
11
11
22
22
33
33
44
44
LL
LL
NN
NN
UU
UU
MM
MM
OR
1b. Press the Call Button or
Page Button (if
programmed, see page
2). Then go to step 3.
See page 2
for your
radio’s
feature-
control
programming.
A
B
C