General Radio Operation
21
When the maximum number of digits has been entered, the cursor will
disappear:
16 numbers maximum for a telephone number or
8 numbers maximum for an ID number.
If you try to add any more digits, you will hear an invalid tone.
• In the number-edit mode,
< will function as a backspace key.
Pressing this key will erase the previous digit, and the cursor will
move to the left. When the last digit on the display has been erased,
an additional press of
<, or pressing >, will cause you to leave the
number-edit mode without making any changes and re-enter the
procedure at step 7.
• Some telephone systems may require a pause to be entered as part of
the number dialed (for example, when dialing “9” to get an outside
line). Pressing
* followed by # will enter a pause in the number
(shown as a “
PP
PP
” on the display).
10a.To save the change, press the
Select Button again. This will also
return you to the list (step 7) to
make additional changes.
Notes
See page 2
for your
radio’s
feature-
control
programming.
A
B
C
10b.To cancel the change, press
O. This will also return you
to the home display and out
of the change (reprogram)
mode.
To Next Page
Loading...
Need help?
General
