50
Common Radio Features
7a. Use < or > to
select additional
channels to be
added or deleted
from the scan list.
8. Press
O to exit the scan list programming mode.
The following notes are dependent upon your radio’s
programming; consult you service technician.
• A maximum of 16 channels can be added to the scan list
(including the selected channel). If you try to add more than
16 channels to the scan list, the radio will sound an invalid
tone to indicate the scan list is full.
• Anytime a new priority-one channel is assigned, the radio
will automatically cancel the old priority-one channel
assignment (radio service software programmable).
• Anytime a new priority-two channel is assigned, the radio
will automatically cancel the old priority-two channel
assignment (radio service software programmable).
Notes
OR
7b. Use the keypad to
go directly to a
channel number to
be added or
deleted from the
scan list.
7c. Rotate the 16-
Position Select
Knob to select
additional
channels to be
added or deleted
from the scan list.
XTS 3000
A
B
C
OR
To Next Page
Loading...
Need help?
General
