Motorola ASTRO Digital XTS 3000 - KEY Erasure (Method 2)

To Next Page

To Previous Page

Special Radio Features

KEY Erasure (All KEYS Erased) — Method 2

1. With the radio on, press and hold the Top Side Button; while holding

this button down, press the Emergency Button.

DO NOT press the Emergency Button before pressing the Top

Side Button unless you are in an emergency situation; this would

send an emergency alarm.

2. When all the encryption keys are erased, the

display will show “

.”

MultiKEY

The multikey feature allows your radio to be equipped with as many as 16

different encryption keys and supports up to two different encryption

algorithms simultaneously (for example, DVP-XL™ and DES-XL, or

DVP™ and DVP-XL).

• Multikey — The encryption keys can be tied (strapped), on a one-

per-channel basis through radio service software. In addition, you

can have operator-selectable keys, operator-selectable indices, and

operator-selectable key erasure.

• Trunked Multikey — If you use your radio for both conventional

and trunked applications, you will have to strap your encryption keys

for trunking on a per- talkgroup or announcement-group basis. In

addition, you may strap a different key to other features for example,

dynamic regrouping, failsoft, emergency talkgroup, or emergency-

announcement group.

KEY Selection

1. Press

> until the KK

softkey appears on the display.

2. Press

M directly below KK

3. The display changes to show the last user-

selected and stored encryption key and the

available softkey selections.

Note

Related product manuals