70
Additional Information
Continuous,
Medium-Pitched
Tone
Volume Set
when volume changed on a quiet
channel
Emergency Exit upon exiting the emergency state
PTT Sidetone
when data is sent by pressing the PTT
switch, but the user must wait to talk
A Group of
Medium-Pitched
Tones
Failsoft when system fails
Automatic Call
Back
when voice channel is available from
previous request
Talk Permit
upon pressing the PTT switch;
verifying system accepting
transmissions
Dispatcher-
Interrupter
Upon receipt of a dispatcher-
interrupt call
Keyfail
when an encryption key has been
lost
Console
Acknowledge
when a status, message, emergency
alarm, or reprogram request ACK is
received
Received
Individual Call
when a Call Alert or Private
Conversation call is received
Call Alert Sent
when a Call Alert is received by the
target radio
Short,
High-Pitched
Tone
(Chirp)
Low-Battery
Chirp
when battery is below preset
threshold value
Phone Dekey
Chirp
from radio to phone line upon
releasing the PTT switch
Continuous,
High-Pitched
Tone
Quik-Call™
Group Call
when a Quik-Call group call is
received
A Group of
High-Pitched
Tones
Quik-Call
Individual Call
when a Quik-Call individual call is
received
Ringing
Phone Ringing when a phone call is received
Enhanced Call
Received
when originator receives ACK from
an enhanced private call
Gurgle
Dynamic
Regrouping/Over-
The-Air
Programming
when a dynamic ID has been received
and the PTT switch is pressed and the
reprogrammed group has not been
selected and when the radio is
successfully re-keyed
Sound
Tone Name Occurs:
To Next Page
Loading...
