Motorola DS9208-1D User Manual

1 - 4 DS9208-1D Product Reference Guide
Configuring the Digital Scanner
To configure the digital scanner use the bar codes included in this manual, or use the 123Scan
2
configuration
program. See Chapter 4, User Preferences & Miscellaneous Options and Chapter 9, Symbologies for
information about programming the digital scanner using bar code menus. See Chapter 10, 123Scan2 for
information on using this configuration program. Also see each host-specific chapter to set up connection to a
specific host type.
Mounting the Digital Scanner
Wall Mount Bracket
An optional wall mount bracket is available for mounting the scanner to a wall or other vertical surface. For a
template that facilitates screw placement, see Mounting Templates on page 1-8.
To mount the DS9208-1D:
1. Place the bracket in its desired location on the wall, and insert two #8 screws through each screw hole in
the bracket.
Figure 1-3 Installing the Wall Mount Bracket
2. Tighten the screws to secure the bracket to the wall.
NOTE Select a screw type and length appropriate for the wall material.

Motorola DS9208-1D Specifications

General

Brand	Motorola
Model	DS9208-1D
Category	Scanner
Language	English