USB Interface 5 - 3
4. On first installation when using Windows, the software prompts to select or install the Human Interface
Device driver. To install this driver, provided by Windows, click Next through all the choices and click
Finished on the last choice. The digital scanner powers up during this installation.
5. To modify any other parameter options, scan the appropriate bar codes in this chapter.
If problems occur with the system, see Troubleshooting on page 3-2.
USB Parameter Defaults
Table 5-1 lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s)
provided in the Parameter Descriptions section beginning on page 5-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 5-1
USB Interface Parameter Defaults
Parameter Default
Page
Number
USB Host Parameters
USB Device Type HID Keyboard Emulation
5-4
Symbol Native API (SNAPI) Status Handshaking Enable
5-5
USB Country Keyboard Types (Country Codes) North American
5-6
USB Keystroke Delay No Delay
5-8
Simulated Caps Lock Disable
5-9
USB CAPS Lock Override Disable
5-9
USB Ignore Unknown Characters Enable
5-10
USB Convert Unknown to Code 39 Disable
5-10
USB Ignore Beep Directive Honor
5-11
USB Ignore Type Directive Honor
5-11
Emulate Keypad Disable
5-12
Emulate Keypad with Leading Zero Disable
5-12
USB FN1 Substitution Disable
5-13
Function Key Mapping Disable
5-13
Convert Case None
5-14
USB Static CDC Enable
5-14
USB Polling Interval 8 msec
5-15
Quick Keypad Emulation Disable
5-17
Fast HID Keyboard Emulation Disable
5-17
IBM Specification Version Original Specification
5-18