Motorola DS9208-1D User Manual

4 - 18 DS9208-1D Product Reference Guide
Decoding Illumination (Hand-Held Mode Only)
Parameter # F0h, 2Ah
When in hand-held mode, selecting Enable Decoding Illumination causes the digital scanner to flash
illumination to aid decoding. Select Disable Decoding Illumination to prevent the digital scanner from using
decoding illumination.
Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the
distance to the target increases.
Post Decode Illumination
Parameter # F2h 29h
This parameter controls illumination after decode. Select Always Off to turn off illumination immediately after
decode. Select
Always On to keep Illumination on after decode so the scanner is ready for next decode, or to
keep illumination on until timeout.
*Enable Decoding Illumination
(01h)
Disable Decoding Illumination
(00h)
Always On
(00h)
*Always Off
(01h)

Motorola DS9208-1D Specifications

General

Brand	Motorola
Model	DS9208-1D
Category	Scanner
Language	English