Motorola DS9208-1D - Presentation Aiming Pattern

User Preferences & Miscellaneous Options 4 - 15
Presentation Aiming Pattern
Parameter # F1h, 4Eh
Select Enable Presentation Aiming Pattern to project the aiming pattern during bar code capture in
presentation mode or Disable Presentation Aiming Pattern to turn the aiming pattern off.
NOTE With Picklist Mode on page 4-21 enabled, the decode aiming pattern flashes even when the Decode
Aiming Pattern is disabled.
Enable Presentation Aiming Pattern
(01h)
*Disable Presentation Aiming Pattern
(00h)