Motorola DS9208-1D User Manual

A - 2 DS9208-1D Product Reference Guide
Post Decode Illumination F2h 29h Always Off 4-18
Illumination Always On
(Presentation Mode Only)
F2h 59h Illumination Automatically
Controlled
4-19
Presentation Mode Field of View F1h 61h Full 4-20
Picklist Mode F0h 92h Enabled in Trigger Mode 4-21
Continuous Bar Code Read F1h 89h Disable 4-22
Unique Bar Code Reporting F1h D31h Disable 4-22
Decode Session Timeout 88h 9.9 Sec 4-23
Timeout Between Decodes, Same Symbol 89h 0.3 Sec 4-23
Timeout Between Decodes, Different
Symbols
90h 0.2 Sec 4-24
Fuzzy 1D Processing F1h 02h Enable 4-24
Motion Tolerance
(Hand-Held Trigger Modes Only)
F2h 5Ah Less Motion Tolerance 4-25
Miscellaneous Options
Transmit Code ID Character 2Dh None 4-26
Prefix Value 63h, 69h 7013 <CR><LF> 4-27
Suffix 1 Value
Suffix 2 Value
62h 68h
64h 6Ah
7013 <CR><LF> 4-27
Scan Data Transmission Format EBh Data as is 4-28
FN1 Substitution Values 67h 6Dh Set 4-29
Transmit “No Read” Message 5Eh Disable 4-30
USB Host Parameters
USB Device Type HID Keyboard Emulation 5-4
Symbol Native API (SNAPI) Status
Handshaking
Enable 5-5
USB Country Keyboard Types
(Country Codes)
North American 5-6
USB Keystroke Delay No Delay 5-8
Simulated Caps Lock Disable 5-9
USB CAPS Lock Override Disable 5-9
USB Ignore Unknown Characters Enable 5-10
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.

Motorola DS9208-1D Specifications

General

Brand	Motorola
Model	DS9208-1D
Category	Scanner
Language	English