6 - 2 MC75 User Guide
Single Slot USB/Serial Cradle
This section describes how to use a Single Slot USB/Serial cradle with the MC75. For USB communication setup
procedures refer to the MC75 Integrator Guide.
The Single Slot USB/Serial Cradle:
•
Provides 5.4 VDC power for operating the MC75.
•
Synchronizes information between the MC75 and a host computer. Refer to the MC75 Integrator Guide for
information on setting up a partnership between the MC75 and a host computer.
•
Charges the MC75’s battery.
•
Charges a spare battery.
Charging the MC75 Battery
Connect the cradle to power. Insert the MC75 into the slot to begin charging.
Figure 6-1
MC75 Battery Charging
Charging/Battery Status
LED
To Next Page
Loading...
