Motorola MC75 - Taking Photos

Using the MC75 2 - 33
Figure 2-24 Sample Scan Application with Preview Window
4. Move the MC75 until the red aiming reticle is on the bar code to scan. The aiming reticle turns green when the
MC75 is able to decode the bar code.
Figure 2-25 Digital Camera Scanning
5. Release the scan button. The Scan/Decode LED lights green and a beep sounds, by default, to indicate the
bar code was decoded successfully.
Taking Photos
To take a photo:
1. Tap Start > Programs > Pictures & Videos icon.
2. Tap Camera on the command bar.
3. Check the image on the view finder, adjust if necessary.
4. Press the Enter key to take the picture. Hold the MC75 still until the camera flash occurs or the shutter sound
is heard.