Using the MC75 2 - 27
Function Buttons
The MC75’s buttons perform certain functions.
Figure 2-16
Function Buttons
•
Power: Press the red Power button to turn the MC75 screen on and off. The MC75 is in suspend mode when
the screen is off. For more information, see Powering On the MC75 on page 1-8. Also use the Power button
to reset the MC75 by performing a warm or cold boot. See Resetting the MC75 on page 2-14.
•
Scan/Action: Press to scan bar codes or capture images. See Data Capture on page 2-29.
Or, press to open an application or perform a function. See the Microsoft
®
Applications for Mobile 6 User
Guide to set an application to open.
•
Up/Down: Press to increase or decrease the MC75’s volume.
•
Action: Press to open an application or perform a function. See the Microsoft
®
Applications for Mobile 6
User Guide to set an application to open.
!.
*@
%,
#&
_‘
?:
-
Table 2-14
Special Characters (Continued)
Key Special Characters Key Special Characters
Scan/Action
Button
Power Button
Up/Down Button
Action Button
Scan/Action
Button
To Next Page
Loading...
Need help?
General
