During the Call
During the call, label of the right SOFT key indicates the next possible change. Accessory default setup is:
Table 9: During the Call
Soft Key Label Audio Setting
Spkr Audio goes to the main speaker (Speaker HIGH is displayed)
Erpce Audio goes to the earpiece (Speaker LOW is displayed)
Writing Text
Every time that you see text entry screen, refer to this section.
Related Links
Unlocking Your Radio on page 24
Selecting Text Entry Modes
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Mode.
2 Select one of the following:
• Primary — for entering alphanumeric characters.
• Numeric — for entering numbers only.
• Symbol — for entering symbols only.
• Secondary — for entering alphanumeric characters (this mode is optional and you have to add it to the list). It
is convenient when you use one language, and sometimes wish to switch to another one.
Note: In the text entry screen, you can also press # key repeatedly to toggle through the entry modes.
Selecting Text Entry Methods and Languages
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENU → Entry Setup.
2 Select one of the following:
• TAP — Enter letters, numbers, and symbols by pressing an alphanumeric key one or more times.
• iTAP — Let the radio predict each word as you press an alphanumeric key.
Note: You can use these methods in the languages programmed in the radio.
30 | Getting Started
Send Feedback | |
To Next Page
Loading...
