Motorola MTM800 E - Embedded Number; Storing Numbers from Messages; Calling Numbers in Messages; Making Group Calls on Thetalkgroup of the Message Sender

• Resend (only for Outbox) — Invokes the edit screen with previously entered text with the same recipient.
After editing, press Send, the PTT button, or the SEND key to send.
• Forward — Invokes the edit screen with the old message to send it to a different participant. After editing,
press Send, the PTT button, or SEND key to send.
• Refresh — Re-orders the message list and displays the new messages.
• Delivery Status (only for Outbox) — Shows the date and time of the message when it sent, delivered, read,
and expired was not delivered, expired was not read, failed unknown.
Embedded Number
This feature allows you to call a number from a message or to start a group call with the message sender talkgroup.
Storing Numbers from Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the sender's or embedded number from the message to a new or existing
contact.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
Note: To store a number for a new contact, select [New Contact] and fill out the required fields. Press
Done to save it..
8 Select Edit.
9 Choose the Type of the new number and press Done.
Calling Numbers in Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can return a voice call to the sender of a message or to any number that is embedded in
the message text.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 To call, highlight to the required number and press the PTT button or the SEND key.
7 Select Ctype to choose the type of call (Private, Phone, or PABX).
8 Press the PTT button or the SEND key.
Making Group Calls on theTalkgroup of the Message Sender
Prerequisites: Embedded Number feature is enabled by your service provider.
60 | Main Menu
Send Feedback | |