Related Links
Entering TMO / DMO Mode on page 25
Selecting Network Operation Mode on page 86
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks.
3 Select one of the following:
• Networks Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• TXI Mode — Select Activate to stop sending any radio transmission.
Note: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to Trunked
Mode.
Related Links
Entering TMO / DMO Mode on page 25
Networks on page 85
Selecting Your Network
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks → Networks Sel → Home Only.
3 Your radio registers to the home network. If several home networks are defined, the radio registers to the first
available network on the list.
Using the Select Net Registration
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks → Networks Sel → Select Net.
3 Select the required network from the list.
Your radio registers to the selected network.
Using the Foreign Network Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out of the range of
your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Networks → Networks Sel → Foreign Nets.
86 | Main Menu
Send Feedback | |
To Next Page
Loading...
