EasyManua.ls Logo

Motorola MTM800 E - Writing in Itap Alphanumeric; Writing in TAP Alphanumeric

Motorola MTM800 E
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Key Description
In TAP press to change previously entered small letter to capital.
Down NAVIGATION key
In TAP press to reject word completion and scroll within the text area.
In TAP press to change previously entered capital letter to small.
Left NAVIGATION key
Press to navigate to the left. Press and hold to repeat.
In TAP, if a word completion is available, press to reject the completion.
Right NAVIGATION key
Press to navigate to the right. Press and hold to repeat.
In TAP if a word completion is available, press to accept the word.
MENU If a context-sensitive menu is active, opens the Context Sensitive Menu.
Writing in iTAP Alphanumeric
Prerequisites: Your radio displays the text entry screen.
When and where to use: It allows you to write quicker. For example, try to write David 232!
Procedure:
1 Press MENUEntry SetupPrim..
2 Select iTAPEnglish and press Back.
3 Press MENUEntry Mode.
4 Select Primary.
5 Press 3 key.
The alternative row opens and shows D E F 3.
6 Continue entering the letters by pressing one key for each letter. Press 2, 8, 4, and 3 keys.
Note: Automatic shift to upper case is used at the beginning of a message, after punctuation followed
by space, or for the first letter of a word created as a new contact entry.
The alternative row highlights David.
7 Press * key.
8 Press 2 key and scroll the alternative row by pressing right NAVIGATION key to reach 2.
It automatically changes the entry mode to Numeric.
9 Press 3 and 2 keys.
10 Press and hold 1 key until 0 at the end changes to ..
The alternative row highlights 232..
11 Scroll the alternative row by pressing the right NAVIGATION key to reach the required symbol.
12 Press Select.
You have entered David 232!.
Writing in TAP Alphanumeric
Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press MENUEntry SetupSeco..
2 Select TAPEnglish and press Back.
3 Press MENUEntry Mode.
4 Select Secondary.
Getting Started | 33
| | Send Feedback

Table of Contents

Related product manuals