2 Select Setup → Rotary Knob → Scroll Range.
3 Select one of the following:
• Stay In Range — Scrolling through the talkgroups in the current folder only.
• Scroll To Next — Scrolling through all the talkgroups and folders.
Note: Only when Wrap Around is set to On and the Scroll Range is set to Scroll To Next, you are
able to scroll through all the talkgroups and folders.
Setting Rotary Knob Talkgroup Selection
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Rotary Knob → Confirm TG Sel..
3 Select one of the following:
• On — You need to confirm the talkgroup selection by pressing Select or pressing the PTT button to
immediately start a call on a new talkgroup.
• Off — Attaches to the selected talkgroup without any additional prompt
Group Setup
This sub-menu allows you to set the scanning and my groups folder.
Scan
This menu item allows you to activate/deactivate scanning, view the active scan list, and edit the scan lists. This
feature is available only for the TMO Mode. Your radio joins any group call as long as this group is defined in the
scan list and scan is turned on.
Related Links
Activating Talkgroup Scanning on page 27
Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Related Links
Scan on page 80
Setting Talkgroups in the Active Scan List
When and where to use: If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the MENU key.
80 | Main Menu
Send Feedback | |
To Next Page
Loading...
