2 Select More . . . → Group Setup → Scan → Active List.
Note: If Scanning is Off is displayed, go to More . . . → Group Setup → Scan → Scanning → On to
enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
5 Select one of the following:
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.
Setting Scan Lists
When and where to use: If you want to set up any scan list.
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scan Lists.
3 Highlight required scan list and press MENU to see additional settings:
• Rename — Enters new name for that scan list.
• Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
• Clear — Deletes all the talkgroup assigned to that scan list.
• Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup folders and assign
appropriate priority.
• Edit — Changes the priority of the required talkgroup or deletes it.
Deleting Talkgroups from Scan Lists
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → Scan → Scan Lists.
3 Highlight the required scan list and press MENU → Edit.
4 Highlight the required talkgroup and press MENU → Delete.
My Groups
This sub-menu allows you to select/edit your favorite group list.
Adding Favorite Folders
Procedure:
1 From the home screen, press the MENU key.
2 Select Group Setup → My Groups.
3 Select [New Folder].
4 Enter the name and select Ok.
Adding Talkgroups to Favorite Folders
Procedure:
1 From the home screen, press the MENU key.
2 Select More . . . → Group Setup → My Groups.
3 Select <FolderName>.
4 Select [New Group].
Main Menu | 81
| | Send Feedback