Figure 2: Direct Mode Operation
Entering DMO Mode
To enter the DMO Mode:
• From the home screen, press the MENU key. Select More . . . → Networks → Direct Mode.
• From the home screen, select Optns → Direct Mode.
Selecting Talkgroups
From the home screen, use one of the following methods:
• Press left or right NAVIGATION key. Press Select to confirm.
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press ROTARY KNOB and rotate it until the required talkgroup name is displayed. Press Select to confirm.
Note: If the ROTARY KNOB mode is set to Scroll, then you do not need to press it to enter the scrolling
mode.
Note: Your radio can have an access up to three levels of the folder structure.
Making Group Calls in DMO
The Group Call is received by all members of the selected group who have their units turned on and are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.
Receiving Group Calls in Idle
Procedure:
1 The radio receives a Group Call.
Modes | 41
| | Send Feedback
To Next Page
Loading...
