EasyManua.ls Logo

Motorola MTM800 E - Setting Wallpaper; Time and Date; Setting Time and Date on the Display; Setting the Time Format

Motorola MTM800 E
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Semi Auto – backlight is turning on when you are switching on the radio or pressing a button assigned to the
backlight feature.
Manual – backlight is toggled by pressing the BACKLIGHT key.
Setting Wallpaper
When and where to use: To change the look of the home screen.
Procedure:
1 From the home screen, press the MENU key.
2 Select SetupDisplayWallpaper.
3 Select one of the following:
On — To activate this feature.
Off — To deactivate this feature.
Time and Date
This sub-menu controls the displayed time and date on the home screen.
Note: If the Home Display Text Message feature is enabled, Home Mode Display Text may cover time and
date, depending on the Configurable Idle Screen settings.
Note: Infrastructure synchronizes the time and date. When not within the infrastructure signal range you
can set the values manually.
Setting Time and Date on the Display
Procedure:
1 From the home screen, press the MENU key.
2 Select SetupTime & DateDisplay.
3 Select one of the following:
Time & Date — Your radio displays time and date.
Time Only — Your radio displays time only. Format Date sub-menu is disabled.
Date Only — Your radio displays date only. Format Time sub-menu is disabled.
Off — Your radio does not display time nor date. Format menu is disabled.
Related Links
Display on page 20
Display on page 75
Setting the Time Format
Prerequisites: If MENUSetupTime & DateDisplay is set to Time & Date or Time Only.
Procedure:
1 From the home screen, press the MENU key.
2 Select SetupTime & DateFormatFormat Time.
3 Select one of the following:
12-Hour — Displays the time with am (before noon) or pm (after noon) indication.
24-Hour.
76 | Main Menu
Send Feedback | |

Table of Contents

Related product manuals