6
Installing the Battery
1.
Remove the battery from its protective clear plastic case.
2.
Insert the battery top into the compartment as illustrated.
3.
Carefully slide the battery until it clicks into place.
Replacing the Battery
To remove the battery:
1.
Lift the latch on the bottom as per marking.
2.
Pull the battery out.
3.
Replace the battery.
Indicates an optional feature that may be
offered by some Service Providers.
Check with your Service Provider for
more information.
Indicates a prompt or message
configured by your Service Provider.
Battery changing is NOT allowed in gas and
dust environment. Battery replacing must occur
ONLY in non-hazardous areas.
Example Description
To Next Page
Loading...
