153
What to do if...
Your MTP850 Ex/MTP810 Ex flashes the following
messages:
Messages Message Description
...-Rcvd Call received but not answered, or rejected.
Attachment
Failed
The MTP850 Ex/MTP810 Ex could not perform
talkgroup attachment. The MTP850 Ex/MTP810 Ex
keeps on trying. If it does not succeed, try another
talkgroup.
Authenticate
Failure
The MTP850 Ex/MTP810 Ex could not register on an
Authenticated system (for example, the Authentication
key is incorrect, or Authentication is disabled in the
MTP850 Ex/MTP810 Ex).
Battery Flat The battery is uncharged. Recharge the battery.
Call Canceled Called MTP850 Ex/MTP810 Ex cancelled the call.
Call Ended • Faulty channel. Please try later.
• Called MTP850 Ex/MTP810 Ex ended the call.
Call Preempted Channel being used for priority.
Emgcy In Use:
Wait For Mic
The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency
Call on the same talkgroup. The MTP850 Ex/MTP810
Ex microphone is not active during this time, but the
MTP850 Ex/MTP810 Ex will automatically try to regain
talk permit after a predetermined time.
Emgcy Mic
Ended
The Hot Microphone timer has automatically expired, or
the user has pressed the PTT button to cancel the Hot
Microphone feature.
Emgcy Mic On The Hot Microphone feature is active, and the MTP850
Ex/MTP810 Ex is automatically transmitting hands free
emergency audio.
Empty Entry The speed number you dialled does not exist, or the
number exists but the group is non-selectable.
To Next Page
Loading...
