69
Emergency Operation
General
Emergency Operation is available in TMO and in DMO, if the
MTP850 Ex/MTP810 Ex is in service.
Emergency Mode indication (alert tones) can be disabled by
your Service Provider.
Dual Microphone Feature
See “How to Hold Your MTP850 Ex/MTP810 Ex” on page 16.
Entering TMO or DMO
See “Selecting TMO or DMO Operation” on page 29.
Important Information
• The required time you need to press the Emergency button is
set by default to 0.5 seconds. The time can be configured by
your Service Provider.
• Pressing the Emergency button even if Transmit Inhibit is
activated causes immediately the MTP850 Ex/MTP810 Ex to
transmit. When entering Emergency Operation the MTP850
Ex/MTP810 Ex should not be within the RF sensitive area any
longer!
• The MTP850 Ex/MTP810 Ex interrupts the AL call when you
press the Emergency button.
• For call alert, see settings in the Tones menu option
(page 118)
.
• Pressing the Emergency button can be used to send the GPS
location infromation, if this option is enabled by your Service
Provider