Motorola MTP850 Ex - Location

137
The Menu
To set up your operating mode:
1. From the main menu, select More... > Networks > Direct
Mode
.
2. The MTP850 Ex/MTP810 Ex switches to Direct Mode.
.Setting Transmit Inhibit (TXI) Mode
This mode should always be set before
entering areas where transmission is
prohibited, e.g. in hospitals or in potentially
explosive areas.
To activate the TXI Mode:
1. From the main menu, select More...
> Networks > TXI Mode
.
2. Select Activate .
The MTP850 Ex/MTP810 Ex will sound the “Transmit Inhibit”
tone. The display shows TXI Mode in the first row
, and the
solid amber LED indicates the TXI Mode.
To deactivate the TXI Mode, e.g. after
you have left the area
where transmission is prohibited:
1. From the main menu, select More... > Networks
> TXI Mode
.
2. Select Deactivate .
The MTP850 Ex/MTP810 Ex sounds the “Transmit Inhibit”
tone and exits TXI.
Location
Refer to “GPS Location Services” on page 97 for details.
It is not possible to switch from Direct Mode to Trunked Mode, if
the MTP850 Ex/MTP810 Ex is in Transmit Inhibit Mode.
All menu items which cause transmitting are blocked in TXI
Mode. It is not possible to change the group.
TXI Mode
Deactivate
Activate
Select Back