Motorola MTP850 Ex - Receiving a DMO Group Call

58
> If synchronising with a gateway is not successful a
repeater call will be attempted.
> If it is successful your MTP850 Ex/MTP810 Ex will
display the message Repeater Call and a repeater
call will proceed. The Gateway icon will disappear
and the Repeater icons will be solid.
> If it is not successful your MTP850 Ex/MTP810 Ex
will display the message MS-MS Call and a terminal
to terminal call will proceed. The Gateway and
Repeater icons will disappear.
Receiving a DMO Group Call
You can receive a DMO Group Call only when your MTP850
Ex/MTP810 Ex is in DMO.
Your MTP850 Ex/MTP810 Ex will display the caller’s private
number or alias, and the talkgroup name.
The following screens show examples of how the caller’s
identity can be displayed.
Receiving a DMO Group Call (MS - MS)
If Gateway and Repeater mode is selected, and if one of the
devices is not available, the call setup is proceeding as if this
device was not selected.
Example: In case of the Gateway is available and the Repeater
is not available, after an unsuccessful Gateway call attempt the
call falls back to MS - MS mode immediately with the MS-MS
call message.
For call alert, see settings in the Tones menu option (page 118)
.
Private ID
Private ID
OR
without alias
with alias
Without alias and
OR
Private ID
Group In Use
DMO Folder 1
Optns
Group In Use
ID:124
DMO TG4
Optns
Group In Use
ID: David
DMO TG4
Optns
DMO TG4