7
Charging the Battery
Motorola approved chargers provide optimum performance.
Other chargers may not fully charge your Motorola Lithium-
Ion battery or may reduce the life of the battery.
To charge the battery:
1.
Switch the MTP850 Ex/MTP810 Ex Off before charging.
2.
Insert the battery, or the radio with battery into the charger
socket. Select the required plug adapter (UK or European
type) and connect to the charger. Then plug the charger
into a suitable mains socket.
3.
The charger’s LED indicator displays the charging status.
Charger LED Indications
Battery charging must occur ONLY in non-haz-
ardous areas. After charging, the radio must be
left to rest for at least 3 minutes.
Indicator Status
Solid green The battery is fully charged.
Flashing green The battery is charged - 90% capacity or more.
Solid red The battery is charging.
Flashing red The battery is not chargeable or not making a
proper contact.
Flashing orange The battery is in the charger, waiting to be
charged.
No indication The battery is inserted incorrectly.
To Next Page
Loading...
